MS PRO
The most flexible and ultra portable Camera Slider where any radius can be set within secondsCHANGE THE RADIUS WITHIN SECONDS
The Patented Multi Slider System is designed for straight and curved tracks. Two brake levers easily lock the system at any demanded radius, down to the smallest possible radius of 250 mm / 9.8 in.
Carrying made Easy
Just bend the MS PRO and wrap it around your backpack. Or put it in your suitcase. Easy travelling guaranteed.
Mounting on every Segment
Each segment of the MS PRO has a UNC ¼ inch mounting port on the bottom for tripod mounting to ensure highest stability while filming. The mounting ports are in a distance of about 10 cm / 3.9 in.
Straight To Curve? NO Problem!
Allen keys on all segments allow a user-defined adjustment of the system for even greater precision or for a combination of straight and curved tracks.
MS PRO
Lift up your creativity to the next level with the Waterbird Multi Slider MS PRO. The MS PRO is ideal for time-lapse, outdoor takes and product shots.
Within seconds, the MS PRO versions can be changed to be manually controlled by hand as well – you just need to remove the belt (see instruction video below).
The two standard lengths are: 150 cm and 120 cm.
Any other length can be ordered and will be custom made.
MS PRO 150
150 cm length, 120 cm effective length
49 in length, 47 in effective length
The MS PRO 150 provides the highest flexibility regarding object size and allows you to create nearly full circle effects.
MS PRO 120
120 cm length, 90 cm effective length
47 in length, 35.5 in effective length
The MS PRO 120 provides high flexibility regarding object size and allows you to create half circle effects.
When Size matters
You didn’t find the length you need? Please get in touch with us and give us some additional information about the filming task and equipment you would like to use. MS Pro can be produced up to 5 meters, for longer systems please take a look at the MS XL.
FREE Mobile App for Full Control
The free Waterbird Multi Slider App pairs with the control unit of the PRO sliders within seconds.
The intuitive and easy user interface allows you to set a start and end point after initialization.
The exact position of the carriage can be controlled as well as the speed and the acceleration of the transition from and to the start and end point.
The App allows you to set a Ping-Pong and a Step-by-Step mode.
Time Lapse Videos can be created easily while the shutter and focus speed of the camera can be configured in the App.
Download the full User Manual here.
Technical Specifications
It is paramount to us to provide the highest quality components and ensure customer satisfaction. All Multi Sliders are Made in Austria.
| MS PRO 150 | MS PRO 120 | Per extra Meter | |
| Length in cm | 150 cm | 120 cm | 100 cm |
| Effective length in cm | 120 cm | 90 cm | depending on total size |
| Length in inches | 49 in | 47 in | 39.37 in |
| Effective length in inches | 47 in | 35.5 in | depending on total size |
| Motorized | Yes | ||
| Smallest Travel Size for Transportation | 50 cm x 32 cm | 40 cm x 32 cm | – |
| Weight | 4.5 kg or 9.9 lbs | 3.8 kg or 8.4 lbs | 2.4 kg or 5.3 lbs |
| Load Capacity Horizontal Use |
up to 3.5 kg or 7.7 lbs | ||
| Load Capacity Vertical Use |
up to 1.8 kg or 4.0 lbs | ||
| Maximum Speed | 5 cm/sec. or 1.9 in/sec. | ||
| Mounting Options on Bottom | UNC 3/8 inch mounting port on the bottom every 10 cm | ||
| Mounting Options on Top | UNC 3/8 inch mounting screw for a camera head or quick release plate | ||
| Working Mechanism | Glide Bearings on high-end plastic tracks | ||
| Temperature Range | -20° to +50° Celsius (-4°F to 122°F) | ||
| Smallest possible Radius | 250 mm/9.8 in | ||
| Maximum Relative Humidity | 90%, noncondensing | ||
| Width of Sliders | 70 mm or 2.7 in | ||
| Height of Sliders | 65 mm or 2.5 in | ||
| Rails, segments and brake cover | Special composite Plastic | ||
| Carriage Material | CNC machined Aluminum, black anodized | ||
Download the Control Unit Manual here.
| Temperature Range | -20°C to +50°C (-4° F to 122°F) |
| Maximum Relative Humidity | 90%, noncondensating |
| Supply Connector | 5.5/2.1mm or 5.5/2.5mm (Outer/Inner diameter) DC barrel – center positive |
| Supply Voltage | 9 –16 Vdc stabilized voltage |
| Supply Current | Source shall be capable of providing minimum 2A |
| Motor Output | 3 x Molex 22-05-3041 (fitting to Motor Connector Molex 22-01-3047) |
| Motor Type | Bipolar 4-wire stepper Motor maximum 12V and 1,4A rated recommended with a minimum isolation voltage of 24V |
| Camera Trigger Port | 2,5mm (3/32”) Stereo Klinke / TRS Sleeve: GND, Ring: Focus, Tip: Shutter Internal pull-up 3,3V , Maximal Voltage: 5Vdc |
| Auxiliary Port | 3,5mm (1/8”) Stereo Klinke / TRS Sleeve: GND, Ring: Aux 2 In/Out, Tip: Aux 1 In/Out Internal pull-up 3,3V , Maximal Voltage: 5Vdc |
| USB Port | USB Micro B Used for Firmware Updates and future use Max Voltage 5Vdc, no supply of motors via USB |
| Supported FPS | All |
| Min. Step Size | 50 μm |
| Canon E3 (3/32″ TRS) | Canon: 60D, 70D, All the ‘Rebels’ (500D, 550D, 600D etc), T41, T3i, T2i, T1i, Kiss, EOS-30, 33, 50, 50E, 300Vss, 300, 3000, 1000D, 1100D Pentax: K5, K7, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D Samsung: GX, 1L, GX 1S, GX-10, GX-20 Contax: 645, N1, NX, N Digital |
| Canon N3 | Canon: 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III, 5D Mark IV, 1DX, 1DS, 1DC, 1V, 1VHS |
| Nikon 10-pin/DC0 | Nikon: D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D300, D700, D800, F90x, F90, F100, F6, F5 Kodak: DCS-14n Fujifilm: S3 Pro, S5 Pro |
| Nikon 3N/DC2 | Nikon: D90, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D7000, D7100, D600, D610, D750, Df, D5500, D7200, D7500, Coolpix P7700, COOLPIX A, COOLPIX P7800 |
| Nikon DC1 | Nikon: D70S, D80 |
| Olympus UC1 | Olympus: e520, e510, e420, e410, e400, e300, sp-570 uz, sp-560 uz, sp-550 uz, sp-510 zu, E-P2, E-P1, E-620, E-30, E30 E100 E400 E410 E420 E450 E510 E520 E550 E600 E620 SP-550UZ SP-560UZ SP-565UZ SP-570UZ SP-590UZ SP-810UZ E-P1 E-P2 E-P3 E-P5 E-PL2 E-PL3 E-PL5 E-PL6 E-PL7 Stylus 1 E-PM1 E-PM2 XZ-1 EM1 EM5 EM5II EM10 SZ-30MR SZ-20 SZ-11 |
| Panasonic 4-Pole/L1 | Panasonic: Lumix DMC-FZ1000, -FZ200, -FZ100, -GH4, -G5, -G6, -GX7, -G1, -G2, -G3, -G10, -GF1, -GH1, -GH2, -GH3, -GH4, -GH5, -GX7, -L10, -L1, -FZ50, -FZ20, -FZ20K, -FZ25, -FZ30, -FZ50, -FZ100, -FZ200, -FZ150, LC1 Leica: Digilux 1, DIGILUX 2, DIGILUX 3 D-LUX3 D-LUX2 D-LUX1, V-LUX1, V-LUX2 |
| Sony Alpha S | Sony: α100, α200, α300, α350, α450 α500 α550 α560 α580 α700 α850 α900, α33 α35 α37 α55 α57 α65 α77 α99 Konica Minolta: 7D, 5D, DiMAGE 9, 7HL 7U 7, 5, 4X, 3 |
| Sony Alpha S2 | Sony: A7R, A7S, A58, NEX-3NL, A6000, A5000, HX300, RX100, Alpha 7, 7R, 7S, 58, 3000, 5000, 5100, 6000, Cyber-shot DSC-HX50V, HX60, HX60V, HX300, HX400, HX400V, RX10, RX100M2, RX100M3, NEX-3N |
| Fuji RR-90 | Fujifilm: X-T1, X-T10, X-E2, X-M1, X-A2, X-A1, X100T, X30, XQ2, XQ1, and FinePix S1 Cameras, GFX 50S |
| Fuji RR-80 | FujiFilm: FinePix HS20EXR, HS22EXR, HS25EXR, HS28EXR, HS30EXR, HS33EXR, HS38EXE, S2, S5, S20 Pro, S100FS, S200EXR, S205EXR, S9000, S9100, S9500, S9600, IS-1, E-X1, X-S1, X300 |
| Samsung NX | Samsung: NX20, 210, 1000, NX-Series |
Didn’t find your camera on the list? Please send us a mail and we will check which is the right cable for you!
USER MANUAL VIDEOS
First use of the MS PRO 150 including initialization by App.
Change of motorized PRO slider to a manual control by hand.
