Fully integratable Solutions With highest flexibility
The Patented System twice as wide as the Multi Slider or MS SWIFT with a stronger motor for a higher load capacity and more stability. A carriage with ball bearings guarantees smooth movement and an XL motion controller with DMX capability integrates the MS XL into any existing system.
Highly Portable and Quick Setup
The modular system of the MS XL allows an easy transport and quick setup. The track can be divided into small segments that are connected with screws and the rails can be rolled up.
Perfect Stability
Each segment of the MS XL has a 3/8″-16 mounting port on the bottom for tripod mounting to ensure highest stability while the carriage is moving. The mounting ports are in a distance of about 15 cm.
XL Motion Controller
The XL Motion Controller with DMX capability is perfect to integrate into any system. The CNC machined carriage with high end ball bearings guarantees a smooth movement and can be controlled as well with Joystick, Pedals or our own DMX Master.
MS XL
Get a carriage and choose the length you need!
Carriage for MS XL
The Carriage with non-friction ball bearings is the basis of the MS-XL and the place for mounting heads and cameras. The Cheeseplate can be individualized upon request.
Includes:
- CNC machined Aluminum Cheeseplate
- XL Motion Controller
- XL Clearpath Motor
- Timing Belt Pulley
- Power Supply
PLEASE NOTE: No Battery Pack, Joysticks, etc. included – see Accessoires for Extras
MS XL Track
The Track can be ordered in any length and includes rails in the length ordered.
Includes:
- Special Solid Plastic Composition Segments with Threads for Mounting on the Bottom of each Segment
- Stainless Steel Connector Screws for the Segments
- Rails in the length ordered
- Belt in the length ordered
Accessories
Build the perfect Solution for your Filming Need! Find all Accessories here.
XL Motion Controller
| Product | Price excl. VAT |
| XL Motion Controller Standard Bluetooth, USB, Ethernet or DMX |
Price upon request |
HMI Sets
| Product | Price excl. VAT |
| Joystick Set for controlling the MS XL via Joystick via DMX | Price upon request |
| Pedal Set, incl. 2 Pedals | Price upon request |
XL Motion Controller for full integration
The XL Motion Controller is a controller for timelapse and digital motion control for video and photo equipment. It allows to control up to 2 motors (one Clearpath BLDC motor and one bipolar Stepper motor) and the triggering of shutter and focus of a connected camera.
Most models of popular cameras are supported. Auxiliary input and output port for light control and motor control via an analogue voltage is also available.
In addition to the Control Unit of the Standard Multi Slider the XL Motion Controller allows the control via DMX protocol as well as wireless connetion to a mobile phone for controll via our free Apps for iOS and Adroid.
Download the full User Manual and Technical Specs here.
Technical Specifications
| Carriage MS XL | Track per Meter | |
| Size in cm | 37 x 20 x 10 cm | 100 x 18 x 6 cm |
| Length in inches | 14.5 x 7.8 x 3.9 in | 39.4 x 7.1 x 2.4 in |
| Motorized | Yes | |
| Travel Size | Track can be divided to small segments – travel and packing size can be individually adjusted | |
| Weight | 2.215 kg without motor and control unit | 3.75 kg |
| Load Capacity Horizontal Use | 15 kg | |
| Maximum Speed | 1.4 m/sec. | |
| Mounting Options on Bottom | 3/8″-16 mounting port on the bottom every 10 cm | |
| Mounting Options on Top | 3/8″-16 mounting screw | |
| Working Mechanism | Non-Friction Ball Bearings on high-end special composition plastic tracks | |
| Temperature Limits | -20° to +40° Celsius | |
| Smallest possible Radius | 1000 mm | |
Download the Control Unit Manual here.
| Housing | |
| Measurements | 123 x 78 x 43mm without connectors and mounting brackets |
| Housing Material | aluminum, black anodized |
| Operating Parameters | |
| Temperature Range | -20°C to +40°C (-4°F to 104°F) |
| Maximum Relative Humidity | 90%, noncondensating |
| Ports & Connection | |
| Supply Connector | Molex 039301020 |
| Supply Voltage | 12 –48 Vdc stabilized voltage |
| Supply Current | 200mA without external load |
| 12V Out | Stabilized 12Vdc Output. max output current 2A (if no Stepper Motor used) max output current 1A (if Stepper Motor used) output switchable and current monitored by Software can be used for auxiliary equipment on Slider e.g. cameras, Wifi or RF equipment. |
| Motor Output 1 | Molex 039301080 For connecting to a Teknic Clearpath SDSK Series Motor 22-05-3041 (fitting to Motor Connector Molex 22-01-3047) |
| Motor Output 2 | Molex 22-05-3041 For connecting a bipolar 4-wire stepper Motor, maximum output current 1A minimal isolation voltage of motor >16V |
| Camera Trigger Port | 2,5mm (3/32”) Stereo Klinke / TRS Sleeve: GND, Ring: Focus, Tip: Shutter Internal pull-up 3,3V, Maximal pullup Voltage: 5Vdc |
| Auxiliary Port | 3,5mm (1/8”) Stereo Klinke / TRS Sleeve: GND, Ring: Aux 2 In/Out, Tip: Aux 1 In/Out Internal pull-up 3,3V, Maximal pullup Voltage: 5Vdc |
| USB Port | USB Micro B Used for Firmware Updates and Parametrization 5Vdc supply for electronics, no supply of motors via USB |
| DMX in | 3 -pole male XLR receptacle Input for DMX control Signal. Standard DMX512 Signal with 250kbaud supported. |
| DMX out | 3-pole female XLR receptacle Output for DMX control signal. Loop through of input signal. |
| Network | RJ45 Ethernet Connector For integrating in IP based control Systems. *planned for future Software versions |
| Canon E3 (3/32″ TRS) | Canon: 60D, 70D, All the ‘Rebels’ (500D, 550D, 600D etc), T41, T3i, T2i, T1i, Kiss, EOS-30, 33, 50, 50E, 300Vss, 300, 3000, 1000D, 1100D Pentax: K5, K7, *istD, *istDL, *istDs, *ist, *istDL2, *K100D, K110D, K10D, K200, K20D Samsung: GX, 1L, GX 1S, GX-10, GX-20 Contax: 645, N1, NX, N Digital |
| Canon N3 | Canon: 10D, 20D,30D, 40D, 50D, 7D, 6D, 1D Mark II, 1Ds Mark II, 1D Mark III, 1Ds Mark III, 1D Mark IV, 5D, 5D Mark II & 5D Mark III, 5D Mark IV, 1DX, 1DS, 1DC, 1V, 1VHS |
| Nikon 10-pin/DC0 | Nikon: D1H, D1X, D2H, D2X, D2Xs, D2Hs, D200, D3, D4, D300, D700, D800, F90x, F90, F100, F6, F5 Kodak: DCS-14n Fujifilm: S3 Pro, S5 Pro |
| Nikon 3N/DC2 | Nikon: D90, D3100, D3200, D3300, D5000, D5100, D5200, D5300, D7000, D7100, D600, D610, D750, Df, D5500, D7200, D7500, Coolpix P7700, COOLPIX A, COOLPIX P7800 |
| Nikon DC1 | Nikon: D70S, D80 |
| Olympus UC1 | Olympus: e520, e510, e420, e410, e400, e300, sp-570 uz, sp-560 uz, sp-550 uz, sp-510 zu, E-P2, E-P1, E-620, E-30, E30 E100 E400 E410 E420 E450 E510 E520 E550 E600 E620 SP-550UZ SP-560UZ SP-565UZ SP-570UZ SP-590UZ SP-810UZ E-P1 E-P2 E-P3 E-P5 E-PL2 E-PL3 E-PL5 E-PL6 E-PL7 Stylus 1 E-PM1 E-PM2 XZ-1 EM1 EM5 EM5II EM10 SZ-30MR SZ-20 SZ-11 |
| Panasonic 4-Pole/L1 | Panasonic: Lumix DMC-FZ1000, -FZ200, -FZ100, -GH4, -G5, -G6, -GX7, -G1, -G2, -G3, -G10, -GF1, -GH1, -GH2, -GH3, -GH4, -GH5, -GX7, -L10, -L1, -FZ50, -FZ20, -FZ20K, -FZ25, -FZ30, -FZ50, -FZ100, -FZ200, -FZ150, LC1 Leica: Digilux 1, DIGILUX 2, DIGILUX 3 D-LUX3 D-LUX2 D-LUX1, V-LUX1, V-LUX2 |
| Sony Alpha S | Sony: α100, α200, α300, α350, α450 α500 α550 α560 α580 α700 α850 α900, α33 α35 α37 α55 α57 α65 α77 α99 Konica Minolta: 7D, 5D, DiMAGE 9, 7HL 7U 7, 5, 4X, 3 |
| Sony Alpha S2 | Sony: A7R, A7S, A58, NEX-3NL, A6000, A5000, HX300, RX100, Alpha 7, 7R, 7S, 58, 3000, 5000, 5100, 6000, Cyber-shot DSC-HX50V, HX60, HX60V, HX300, HX400, HX400V, RX10, RX100M2, RX100M3, NEX-3N |
| Fuji RR-90 | Fujifilm: X-T1, X-T10, X-E2, X-M1, X-A2, X-A1, X100T, X30, XQ2, XQ1, and FinePix S1 Cameras, GFX 50S |
| Fuji RR-80 | FujiFilm: FinePix HS20EXR, HS22EXR, HS25EXR, HS28EXR, HS30EXR, HS33EXR, HS38EXE, S2, S5, S20 Pro, S100FS, S200EXR, S205EXR, S9000, S9100, S9500, S9600, IS-1, E-X1, X-S1, X300 |
| Samsung NX | Samsung: NX20, 210, 1000, NX-Series |
Didn’t find your camera on the list? Please send us a mail and we will check which is the right cable for you!
GET INSPIRED
Fixed installation of our MS XL on a Live Stage of a big international Band touring around the Globe
Automated Photogrammetry Solution for Scanning large Objects realized for a big international Group
Compare the Systems
Find the perfect solution for your filming needs. If you have a special wish let us know!
| MULTI SLIDER | MS SWIFT High-Speed Motor and Carriage with Ball Bearings |
MS XL Larger Track and Bigger Carriage for Heavy Film Gear |
|
 |
 |
 |
|
| Main Areas of Use |
|
|
|
| Track Size | 70 mm wide, 65 mm high 2.7 in wide, 2.5 in high |
70 mm wide, 65 mm high 2.7 in wide, 2.5 in high |
140 mm wide, 65 mm high 5.5 in wide, 2.5 in high |
| Track length | Every Length Available | Every Length Available | Every Length Available |
| Smallest possible Radius | 250 mm / 9.8 in with 150 cm nearly Circular Effects possible |
250 mm / 9.8 in with 150 cm nearly Circular Effects possible |
1000 mm / 39.4 in with 5 m nearly Circular Effects possible |
| Motor | Stepper Motor (max. 0.05 m/sec.; 1.9 in/sec.) | High-Speed (max. 2.8 m/sec.; 110 in/sec.), Silent Brushless DC Motor | XL Brushless DC Motor |
| Control Unit | Standard | Standard or XL Motion Controller | XL Motion Controller |
| User Interface | Smartphone App (Android and iOS) | Smartphone App (Android and iOS) or DMX, Joystick or Pedals | DMX, Joystick or Pedals |
| Bearings | Glide Bearings | Non-Friction Ball Bearings | Non-Friction Ball Bearings |
| Made for | DSLR or Compact Cameras | DSLR or Compact Cameras | PTZ Cameras and Heavy Film Equipment |
| Load Capacity Horizontal Use | up to 3.5 kg | up to 4.5 kg | up to 15 kg |